220V Electric Candy Chocolate Melting Pot Chocolate Fountain DIY Kitchen Tool with Heart-shape Mold for Soap Making

Description:

Item type: Melting Pot

Plug type: EU plug

Instructions for use:

Make the chocolate into small pieces and put it into the furnace.

Connect the device to the power source. At level 2 (approximately 70℃), continually shake it.

Place the melted chocolate in the mold.

Put it into refrigerate for about 5 minutes.

Then take it out.

Product size: 19X14X8cm

Rated frequency: 50-60Hz

Color: Yellow, pink

Rated voltage: 220V

Rated power: 20W

Note: 1. Do not immerse the chocolate melter in water. 2. Can not use dishwasher to clean.

Features

-- Environmental friendly material

-- Evenly heated

-- Easy operation with ergonomic long handle

Shell material: Plastic

Package includes:

1 x Chocolate Melting Pot

1 x Spiral Fork

1 x Flat Fork

1 x Scraping Tool

1 x Heart-shape Mold

1 x Plastic Mesh

10 x Rubber Forks

10 x Bamboo or plastic stick

1 x English instructions

Notes:

1-2mm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor settings.

We provide you with the best product and service. If you have any problem, please let us know, and we will solve the problem ASAP. Thank you so much.

Cautions:
- Only for indoor use.
- Please keep it out of the reach of children.
- Do not touch the appliance or the plug with wet hands.
- It is designed solely for melting chocolate at a maximum temperature of over 70 Deg.C.
- It is absolutely not for sterilization or cooking.
- Avoid contact with any metal parts when the appliance is in use.
- Please do not immerse it in water.
- Heat up chocolate only in the melting pot, do not heat up chocolate directly in the basic unit.

Maintenance and Cleaning:
- Keep the appliance in a dry and ventilated place.
- Wipe the appliance with a damp cloth.
- Rinse the melting pot and the moulds with hot water, and they are not dishwasher safe.
- Do not use any sharp instruments to clean the appliance or the moulds.

Use Instructions:
1. Place the appliance on an even surface and lower the melting pot into the recess.
2. Connect the power, preheat the appliance before starting to use.
3. Put the raw materials into the heated aluminum pot (large pieces of raw materials shall be chopped before being put into the pot).
4. Adjust the heating switch to the second level (about 70 Deg.C, stirring while melting).
5. After the raw material completely melts, adjust the switch for one step (about 40 Deg.C, keep the solution warm).
6. Pour the solution into a DIY mold, cool naturally for about 5 minutes, and then refrigerate for about 60 minutes at minus zero.
7. Remove the cooled chunks and finish the DIY process.